Similar Conditions Window: Misfire
- Same Misfire Warm-Up State - Indicates if the misfire occurred when the engine was warmed up (above 71°C (160° F).
- In Similar Misfire Window - An indicator that 'Absolute MAP When Misfire Occurred' and 'RPM When Misfire Occurred' are all in the same range when the failure occurred. Indicated by switching from 'NO' to 'YES'.
- Absolute MAP When Misfire Occurred - The stored MAP reading at the time of failure. Informs the user at what engine load the failure occurred.
- Absolute MAP - A live reading of engine load to aid the user in accessing the Similar Conditions Window.
- RPM When Misfire Occurred - The stored RPM reading at the time of failure. Informs the user at what engine RPM the failure occurred.
- Engine RPM - A live reading of engine RPM to aid the user in accessing the Similar Conditions Window.
- Adaptive Memory Factor - The PCM utilizes both Short Term Compensation and Long Term Adaptive to calculate the Adaptive Memory Factor for total fuel correction.
- 200 Rev Counter - Counts 0-100 720 degree cycles.
- SCW Cat 200 Rev Counter - Counts when in similar conditions.
- SCW FTP 1000 Rev Counter - Counts 0-4 when in similar conditions.
- Misfire Good Trip Counter - Counts up to three to turn OFF the MIL.
- Misfire Data - Data collected during test.
- Test Done This Trip - Indicates YES when the test is done.