Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 1984 >> Bronco II Automatic >> Repair and Diagnosis >> Engine Performance >> System >> EGR System >> Testing >> Ported Vacuum Switch >> PVS with 3 Connections

PVS with 3 Connections

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Disconnect EGR vacuum hose from PVS and connect manifold vacuum or external vacuum source to lowest port on PVS. See Figure .
  2. Detach distributor supply hose from center port, and attach vacuum gauge to center port.
  3. Start engine and warm up until engine operating temperature is reached. If no vacuum is present, replace PVS. If present, PVS is okay.
Fig 1: Cutaway View of 2-Port PVS PVS will open when engine reaches operating temperature.
G8778