Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 1985 >> Mustang SVO >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - DURA-Spark II >> Testing >> Ground Circuit Continuity Check

Ground Circuit Continuity Check

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Insert a small straight pin in control module Black wire. Connect negative voltmeter lead to distributor base and positive lead to straight pin in black wire. Measure resistance and remove straight pin from wire.
  2. If voltage reading was greater than .5 volt, proceed to Distributor Ground Circuit Continuity Check. If voltage was .5 volt or less, replace control module.
scientia non olet · About Brad's Car Manuals