Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 1986 >> Mustang SVO >> Repair and Diagnosis >> Engine Performance >> System >> 1.9L/2.3L Turbo Testing >> Quick Tests >> Key On/Engine Running (KOER) Self-Test >> Code Output

Code Output

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Deactivate SELF-TEST (disconnect jumper wire). Start engine and run it at 2000 RPM for 2 minutes to warm up EGO sensor. Turn engine off and wait 10 seconds. Insert jumper to activate SELF TEST. DO NOT  depress throttle during test unless a Dynamic Response code occurs.
  2. Start engine. The engine ID code will be displayed. Run test. If Dynamic Response code 1 (10 with STAR tester) occurs, briefly accelerate engine to wide open throttle. The KOER SELF-TEST service codes will then be displayed. Observe and record all codes.
scientia non olet · About Brad's Car Manuals