Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 1990 >> Bronco II RWD, Standard, M5OD-R1 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Module Checks >> DISTRIBUTORLESS Ignition System (Dis) Module

DISTRIBUTORLESS Ignition System (Dis) Module

Download the full database via torrent (~1.1 TB)
  1. Turn ignition off. Using DVOM, connect negative lead to negative battery post and positive lead to DIS connector IGND terminal with connector attached. Resistance should be 5 ohms.
  2. If resistance is not as specified, verify module base plate and mounting screws are clean and tight. If base plate and mounting screws are okay, replace module.
scientia non olet · About Brad's Car Manuals