Test 17, Check Right Coil Circuit

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Connect LED test light between breakout box pins No. (+) J23 (RC1C) and (-) J60 (BAT -). Connect test light between breakout box pins No. (+) J24 (RC2C) and (-) J60 (BAT -).

If test light illuminates in both tests, go to next test. If test light does not illuminate in both tests, one or both coil wires is shorted to ground or coil pack may be damaged. Check connectors, and repair or replace harness. Check for fault codes. If vehicle still does not start, go to next test.