BFL-2 Check Sensor Installation
Ensure sensor is torqued to 12-17 ft. lb. (16-23 N.m). Ensure sensor to rotor clearance is .012-.043" (0.30-1.1 mm). Service as required. Check for intermittent problem from sensor to ABS control unit.
Ensure sensor is torqued to 12-17 ft. lb. (16-23 N.m). Ensure sensor to rotor clearance is .012-.043" (0.30-1.1 mm). Service as required. Check for intermittent problem from sensor to ABS control unit.