Integrated Control Relay Module: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REMOVAL

1. Disconnect the negative battery cable.
2. Locate Integrated Relay Control Module (IRCM) in the engine compartment on the firewall and disconnect electrical harness connector.
3. Remove the module attaching screws from the bracket and remove the IRCM.

INSTALLATION

1. Install the IRCM screws and tighten to 24-35 in lb (3-4 Nm).
2. Connect the electrical harness to the IRCM.
3. Connect the negative battery cable.