Fuel Injector Circuit

Download the full database via torrent (~1.1 TB)

Disconnect injector harness connectors. Using digital ohmmeter, check connector terminal resistance of each injector. Individual injector resistance should be 13-16 ohms on all models. On non-sequential PFI engines, disconnect injector bank harness connector. Check resistance of injector bank. See INJECTOR BANK RESISTANCE table. Repair wiring or any injector not within specification.

INJECTOR BANK RESISTANCE ⁽¹⁾

Engine

Ohms

2.3L

6.0-8.5

3.0L

4.0-5.5

⁽¹⁾	Resistance values are for non-sequential PFI engines only.