Keyless Entry System: Testing: Notes

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

To test and service remote keyless entry system, perform the Quick Test first. Perform pinpoint tests only when instructed to by the Quick Test. When pinpoint tests are completed, repeat Quick Test to ensure system is operational.

NOTE: Keep driver's window rolled down when performing pinpoint tests to avoid getting locked out of vehicle.

Fig 1: Keyless Entry Control Module Connector Terminals ID

Courtesy of FORD MOTOR CO.

Fig 2: Program Connector J4 Terminals ID

Courtesy of FORD MOTOR CO.