Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 1994 >> Probe Base, Automatic >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel >> Testing >> Oil Pressure Sending Unit Test

Oil Pressure Sending Unit Test

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Unplug oil pressure sending unit connector. On 2.0L, sending unit is located at right rear of engine; on 2.5L, it is located at lower right front of engine.
  2. Start engine. Measure resistance between sending unit terminal and ground. Resistance should be approximately 20 ohms at idle.
  3. If resistance is as specified, return to appropriate PINPOINT TEST. Replace sending unit if resistance is not as specified.
scientia non olet · About Brad's Car Manuals