Fuel Injector Resistance

Download the full database via torrent (~1.1 TB)

Disconnect injector harness connectors. Using digital ohmmeter, measure resistance between injector terminals. If resistance is not 11-19 ohms, replace injector.

NOTE: For additional testing and information, proceed to FUEL SYSTEM in appropriate SYSTEM/COMPONENT TESTS article below in this section.

I - SYSTEM/COMPONENT TESTS - EEC (1.8L) (for Escort & Tracer)
I - SYSTEM/COMPONENT TESTS - EEC-IV (1.9L) (for Escort & Tracer)
I - SYSTEM/COMPONENT TESTS - EEC-IV (2.0L) (for Probe)
I - SYSTEM/COMPONENT TESTS - EEC-IV (2.3L) (for Tempo & Topaz)