Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 1997 >> Probe Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - 2.0L >> Drive Cycles >> Monitor Repair Verification Drive Cycles >> Comprehensive Component Monitor Repair Verification Drive Cycle

Comprehensive Component Monitor Repair Verification Drive Cycle

Download the full database via torrent (~1.1 TB)

  1. Refer to and complete the vehicle check and preparation before initiating the following repair verification steps. See VEHICLE CHECK/PREPARATION .
  2. Start the engine and go through the entire OBD-II drive cycle until the comprehensive component monitor shows the completion status by clearing the code P1000 on the scan tool.
  3. If the entire OBD-II drive cycle has been performed and the comprehensive component monitor check has not completed, Repeat quick test. See QUICK TEST .

scientia non olet · About Brad's Car Manuals