Visual Check

Perform the following, and make all necessary repairs before continuing with QUICK TEST:

• Inspect air cleaner and inlet ducts.
• Check all engine vacuum hoses for damage, leaks, cracks, kinks and/or improper routing.
• Inspect system wiring harness for proper connections, bent or broken pins, corrosion, loose wires and proper routing.
• Check alternative fuel tank(s) for adequate CNG or LPG level.
• Check Powertrain Control Module (PCM), sensors and actuators for physical damage.
• Check AFCM (on Contour) for physical damage.
• Check compuvalve, sensors and actuators for physical damage.
• Check engine coolant for proper level and mixture.
• Check transmission fluid level and quality.
• Check Inertia Fuel Shutoff (IFS) switch set.
• Ensure vehicle maintenance schedule has been followed.
• Ensure vehicle battery is fully charged.