Section 615 (Module Communications Network)
WARNING: This page is about a different car, the 2004 Mercury Mountaineer and 2004 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Diagnostic Trouble Code Chart
- Communications Network
- Notes
- Special Tool(s)
- Inspection and Verification
- System Precheck
- Symptom Chart
- Connector Circuit Reference
- Data Link C251
- Anti-Lock Brake System (ABS) Module C155
- Powertrain Control Module (PCM) C175b
- Instrument Cluster C220b
- Electronic Automatic Temperature Control (EATC) C228b
- Restraint Control Module (RCM) C310a
- Driver Seat Module (DSM) C341e
- Driver Seat Module (DSM) C341g
- Vehicle Security Module C3203d
- Vehicle Security Module C3203e
- Vehicle Security Module C3203f
- Tire Pressure Monitoring System Module C3183
- Parking Aid Module C4014
- Pinpoint Test A: The Vehicle Security Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test B: The Driver Seat Module (DSM) Does Not Respond To The Diagnostic Tool
- Pinpoint Test C: The Restraint Control Module (RCM) Does Not Respond To The Diagnostic Tool
- Pinpoint Test D: The Tire Pressure Monitoring System Module Does Not Respond To the Diagnostic Tool
- Pinpoint Test E: The Anti-Lock Brake System (ABS) Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test F: The Parking Aid Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test G: The Powertrain Control Module (PCM) Does Not Respond To The Diagnostic Tool
- Pinpoint Test H: The Instrument Cluster Does Not Respond To The Diagnostic Tool
- Pinpoint Test I: No Instrument Cluster Universal Asynchronous Receiver Transmitter (UART) Based Protocol (UBP) Network Communication
- Pinpoint Test J: The Electronic Automatic Temperature Control (EATC) Module Does Not Respond To The Diagnostic Tool
- Pinpoint Test K: No Controller Area Network (CAN) Communication
- Pinpoint Test L: No International Standards Organization (ISO) 9141 Network Communication
- Pinpoint Test M: No Universal Asynchronous Receiver-Transmitter (UART) Based Protocol (UBP) Network Communication
- Pinpoint Test N: No Module/Network Communication - No Power To The Diagnostic Tool
- General Procedure
- Programmable Module Installation
- Using The New Generation STAR (NGS) Tester When The Original Body Chassis Electrical Module Is Not Available
- Using The New Generation STAR (NGS) Tester When The Original Body Chassis Electrical Module Is Available
- Using The Worldwide Diagnostic System (WDS) When The Original Body Chassis Electrical Module Is Not Available
- Using The Worldwide Diagnostic System (WDS) When The Original Body Chassis Electrical Module Is Available
- Programmable Module Installation
- Removal And Installation