Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2000 >> Explorer 2WD V6-4.0L VIN E >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Position Sensor >> Service and Repair

Throttle Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.







2. Remove the accelerator control snow shield.







3. Remove the Throttle Position (TP) sensor.
1 Disconnect the TP sensor electrical connector.
2 Remove the sensor.

NOTE: The 4.0L (SOHC) is shown, the 4.0L push rod is similar.

INSTALLATION
1. To install, reverse the removal procedure.