Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2000 >> Taurus SEL >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System Control >> Bleeding Brake System >> BRAKELINES >> Conventional Bleeding

Conventional Bleeding

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove dust cap from right rear wheel bleeder fitting. Connect hose to bleeder fitting. Submerge other end of hose in container of clean brake fluid.
  2. Loosen bleeder fitting while an assistant presses brake pedal through its full travel. With brake pedal fully depressed, close bleeder fitting. Wait 5 seconds. Repeat procedure until air bubbles are no longer present at submerged end of hose.
  3. Repeat procedure at left rear, right front and left front wheels. Refill reservoir after each wheel is bled. When bleeding is complete, adjust fluid level to .16" (4.1 mm) below MAX line.