Air Flow Meter/Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the air cleaner outlet tube. For additional information, refer to Fuel Delivery and Air Induction.

3. Remove the MAF sensor.
1 Disconnect the electrical connector.
2 Remove the four nuts and the MAF sensor.

CAUTION: The Mass Air Flow (MAF) is a calibrated unit. Service hot wire element and housing as a complete assembly.

INSTALLATION
1. To install, reverse the removal procedure.