Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2001 >> Explorer Chassis >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Power Window System) >> Component Tests >> Power Window Single Switch

Power Window Single Switch

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2000 Mercury Mountaineer, 2000 Ford Explorer, 1999 Mercury Mountaineer, and 1999 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Remove suspect window switch. See POWER WINDOW SWITCH  under REMOVAL & INSTALLATION. Check for continuity between terminals as specified while operating switch. See appropriate SWITCH TESTING table. If continuity does not exist as specified, replace switch. See Fig 1 or Fig 2 .

SWITCH TESTING (RIGHT FRONT & RIGHT REAR)

Switch Position Continuity Between Terminals No.
Neutral 1 & 2; 5 & 6
Up 2 & 4
Down 4 & 5
Switch Illumination 3 & 7
SWITCH TESTING (LEFT REAR)

Switch Position Continuity Between Terminals No.
Neutral 1 & 5; 2 & 6
Up 4 & 5
Down 2 & 4
Switch Illumination 3 & 7
Fig 1: Identifying Right Front & Left Rear Window Switch Terminals
G97B28184Courtesy of FORD MOTOR CO.
Fig 2: Identifying Right Rear Window Switch Terminals
G97C28185Courtesy of FORD MOTOR CO.