Component Testing Procedure
WARNING: This page is about a different car, the 2006 Mercury Montego, 2006 Ford Freestyle, and 2006 Ford Five Hundred. However, it is still accessible from the selected car via links, so may be relevant.
MULTIFUNCTION SWITCH, LAMP PORTION COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Flash-to-pass | 10 and 9 | Pull stalk slightly towards steering wheel | Closed circuit |
| High beam | 10 and 8 | Toggle stalk towards steering wheel | Closed circuit |
| Turn signal | 10 and 6 | Turn switch to Left | Closed circuit |
| 10 and 7 | Turn switch to Right | Closed circuit |