Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2002 >> Explorer 2WD V8-4.6L VIN W >> Repair and Diagnosis >> Maintenance >> Alignment >> Service and Repair >> Toe Adjustment >> Front

Front

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
Front Toe Adjustment





1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the "straight forward" position using a suitable holding device.

3. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod is rotated.





Remove the clamps.





4. Loosen the nuts.
^ Clean and lubricate the nut(s) and front wheel spindle tie-rod threads.





5. Rotate the front wheel spindle tie-rods.





6. Start the engine and recenter the steering wheel.
^ Recheck the toe settings and adjust if necessary.

7. CAUTION: Make sure to hold the tie-rod end stationary with a wrench while tightening the nut or damage to the boot can occur.

NOTE: Make sure that the toe settings are not disturbed while tightening the nuts.





Tighten the nuts.





8. Install the clamps.