Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2003 >> ZX2 Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Safety Belt System >> General Procedures >> Safety Belt With Anchor Plate Thread Damage

Safety Belt With Anchor Plate Thread Damage

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Remove the broken or stripped bolt and discard.
  2. Drill out the internal threads in the safety belt anchor plate with a 10.7 mm (27/64 in) drill.
  3. Rethread the anchor plate with a 1/2-13 tap (seat belt).
  4. Clean out the chips.
  5. Install the attachment parts. Original parts are to be replaced with the repair parts indicated in the Safety Belt Parts Replacement Guidelines.
  6. When repairing a multiple belt and attachment, install the nut to the bolt in the tunnel area from the underside of the floorpan.
scientia non olet · About Brad's Car Manuals