Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2005 >> Thunderbird >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Engine System-General Information) >> General Procedures >> Connecting Rod Bend

Connecting Rod Bend

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
WARNING: This page is about a different car, the 2006 Mercury Grand Marquis and 2006 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure the connecting rod bend on a suitable alignment fixture. Follow the instructions of the fixture manufacturer. Verify the bend measurement is within specification.
    • If out of specification, install new components as necessary. Refer to ENGINE for the procedure.
      Fig 1: Measuring Connecting Rod Bend
      G03885036Courtesy of FORD MOTOR CO.