Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2007 >> Expedition 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> Disassembly And Assembly Of Subassemblies >> Piston >> Assembly

Disassembly And Assembly Of Subassemblies: Piston: Assembly

Download the full database via torrent (~1.1 TB)
    NOTE: The connecting rod must be installed into the piston with identification markings toward the front.
  1. Position the connecting rod in the piston.
    2. Fig 1: Positioning Connecting Rod In Piston
    GF0000360Courtesy of FORD MOTOR CO.
  2. Lubricate the piston pin and pin bore with clean engine oil.
  3. Install the piston pin in the piston and connecting rod assembly.
  4. Install the piston pin retaining clips in the piston.
  5. Lubricate the piston and the new piston rings with clean engine oil.
  6. Install the piston rings onto the piston.
scientia non olet · About Brad's Car Manuals