Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2007 >> Taurus V6-3.0L VIN U >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Throttle Position Sensor >> Service and Repair

Throttle Position Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
THROTTLE POSITION (TP) SENSOR







Removal
1. Disconnect the battery ground cable.
2. Disconnect the throttle position (TP) sensor electrical connector.
3. Remove the 2 screws and the TP sensor.

Installation

1. NOTE: When installing the new TP sensor, make sure that the radial locator tab on the TP sensor is aligned with the radial locator hole on the throttle body.

Position the new TP sensor and install the 2 new screws.
- Tighten to 3 Nm (27 lb-in).

2. Connect the TP sensor electrical connector.
3. Connect the battery ground cable.