Remote Memory Activation

REMOTE MEMORY ACTIVATION

1. Position the driver seat and mirrors to the desired position.
2. Press the set button on the driver door panel.
3. Within 5 seconds press the 1 or 2 button on the driver door panel. This stores the configuration for driver 1 or driver 2.
4. Press the set button.
5. Within 5 seconds, press any button on the integrated keyhead transmitter (IKT) and then press the 1 or 2 button on the driver door panel to associate the IKT with that position.
6. If a second memory setting is desired, repeat the procedure with the second integrated key.