Control Module: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

4X4 Control Module

Removal and Installation

1. CAUTION: Before removing the audio unit, it must be placed in shipment mode. Failure to follow this instruction may result in damage to the audio unit.

Put the audio unit in shipment mode.
2. Insert the special tool, then remove and support the audio unit.

3. Disconnect the audio unit electrical connector(s) and antenna cable.
4. Remove the 2 instrument panel finish panel screws. Disengage the spring clips at the top. Remove the instrument panel finish panel.

5. Disconnect the finish panel electrical connectors.
6. Disengage the locking tangs and remove the 4X4 control module harness connectors.
7. Remove the 4X4 control module screws.

8. Remove the 4X4 control module.
9. To install, reverse the removal procedure.