Speed Control Switch

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Speed Control Switch

Removal and Installation

1. Remove the driver air bag module. For additional information, refer to Air Bag Systems.

2. NOTE: Carefully grasp and pull the edges to remove the steering wheel spoke finish panels.

If equipped, remove the steering wheel spoke finish panels.

3. NOTE: Using a small, flat-bladed screwdriver, gently pry up the speed control switches from the steering wheel, beginning at the outer edge. Use care not to damage the steering wheel.

Remove the speed control switches.

- Disconnect the electrical connectors.

4. To install, reverse the removal procedure.