Engine Temperature Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Cylinder Head Temperature (CHT) Sensor - 5.4L (4V)

Removal and Installation

1. Remove the battery tray. For additional information, refer to Battery.

2. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.

3. Remove and discard the CHT sensor.
- To install, tighten to 26 Nm (19 lb-ft).

4. To install, reverse the removal procedure.
- Do not reuse the CHT sensor, install a new sensor.