Control Assembly: Service and Repair

Download the full database via torrent (~1.1 TB)

Heating Ventilation Air Conditioning (HVAC) Module

Removal and Installation

NOTE: When installing a new HVAC module on vehicles equipped with Electronic Manual Temperature Control (EMTC), the Programmable Module Installation (PMI) procedure must be carried out to configure the new module to the vehicle. Refer to Module Configuration Programmable Module Installation (PMI).

1. Remove the middle center instrument panel finish panel. For additional information, refer to Instrument Panel and Console Instrument Panel Finish Panel - Center, Middle.

2. Remove the 4 HVAC module screws.

3. Remove the HVAC module.

4. To install, reverse the removal procedure.