Engine Temperature Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)

Cylinder Head Temperature (CHT) Sensor

NOTE: 5.4L shown, 4.6L and 6.8L similar.

Removal and Installation

1. Remove the generator.

2. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.

3. Remove the CHT (Cylinder Head Temperature) sensor.
- Coat the CHT (Cylinder Head Temperature) sensor threads with high temperature nickel anti-seize lubricant prior to installation.

- To install, tighten to 26 Nm (19 lb-ft).

4. To install, reverse the removal procedure.