Connecting Rod, Engine
CONNECTING ROD CAP
Install the 4 connecting rod caps and the 8 new bolts and tighten the bolts in 3 stages.
Stage 1: Tighten to 10 Nm (89 lb-in).
Stage 2: Tighten to 29 Nm (21 lb-ft).
Stage 3: Tighten an additional 90 degrees.
CONNECTING ROD CAP
Install the 4 connecting rod caps and the 8 new bolts and tighten the bolts in 3 stages.
Stage 1: Tighten to 10 Nm (89 lb-in).
Stage 2: Tighten to 29 Nm (21 lb-ft).
Stage 3: Tighten an additional 90 degrees.