Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2012 >> Escape 2WD V6-3.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Manifold Pressure/Vacuum Sensor >> Service and Repair

Manifold Pressure/Vacuum Sensor: Service and Repair

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches



Manifold Absolute Pressure (MAP) Sensor









Removal and Installation

1. Disconnect the Manifold Absolute Pressure (MAP) sensor electrical connector.

2. Remove the bolt and the MAP (Manifold Absolute Pressure) sensor.
- To install, tighten to 6 Nm (53 lb-in).

- When installing the sensor, if the bolt fails to hold specified torque, relocate the sensor and retain, using the auxiliary bolt hole in the upper intake manifold.


3. NOTE: Clean and inspect the sealing surface.
To install, reverse the removal procedure.