Connecting Rod, Engine
ROD BEARING CAP
Tighten the 16 bolts in 2 stages, in the sequence shown.
Stage 1: Tighten to 20 Nm (177 lb-in).
Stage 2: Tighten to 43 Nm (32 lb-ft).
Stage 3: Tighten an additional 135 degrees.
ROD BEARING CAP
Tighten the 16 bolts in 2 stages, in the sequence shown.
Stage 1: Tighten to 20 Nm (177 lb-in).
Stage 2: Tighten to 43 Nm (32 lb-ft).
Stage 3: Tighten an additional 135 degrees.