Manifold Pressure/Vacuum Sensor: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

Manifold Absolute Pressure (MAP) Sensor

Removal and Installation

1. Disconnect the Manifold Absolute Pressure (MAP) sensor electrical connector.

2. Remove the screw and the MAP (Manifold Absolute Pressure) sensor.
- To install, tighten to 3 Nm (27 lb-in).

3. NOTE: Lubricate the MAP (Manifold Absolute Pressure) sensor O-ring seal with clean engine oil.
To install, reverse the removal procedure.