Transfer Case Fluid Level Check

Materials 

Check 

• 1.
  
  Follow the health and safety precautions. REFER to: Health and Safety Precautions

• 2.
  
  With the vehicle in NEUTRAL, position it on a hoist. REFER to: Jacking and Lifting - Overview

• 3.
  
  If equipped. Remove the retainers and the underbody shield.

Courtesy of FORD MOTOR COMPANY

• 4.
  
  Remove the PTU (Power Transfer Unit) fill plug.

Courtesy of FORD MOTOR COMPANY

• 5.
  
  Fill the PTU with clean fluid, level with the fill plug opening.

  Material

  Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant / XY-75W140-QL (WSL-M2C192-A)

Courtesy of FORD MOTOR COMPANY

• 6.
  
  Install the PTU fill plug.

  Torque:

  33 lb.ft (45 Nm)

Courtesy of FORD MOTOR COMPANY

• 7.
  
  If equipped. Install the underbody shield.

Courtesy of FORD MOTOR COMPANY