Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2021 >> Bronco First Edition, 2D Utility >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Engine Controls - 2.7L ECOBOOST (238KW/324PS) >> Removal And Installation >> Powertrain Control Module (PCM) >> Removal

Powertrain Control Module (PCM): Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
NOTE: Removal steps in this procedure may contain installation details.
  1. NOTE: This step is only necessary when installing a new component.

    Download the module information to the diagnostic tool using the Programmable Modules Installation routine. Refer to: Module Programming .

  2. Disconnect the PCM electrical connectors. Release the harness retainers from the lower PCM cover to position aside the harnesses.
    GFD625828Courtesy of FORD MOTOR COMPANY
  3. Release the retaining clips and position the harness aside.
    GFD625829Courtesy of FORD MOTOR COMPANY
  4. Release the retaining clips and remove the harness bracket.
    GFD625830Courtesy of FORD MOTOR COMPANY
  5. Release the retaining clips and remove the PCM cover.
    GFD625831Courtesy of FORD MOTOR COMPANY
  6. Release the clips and remove the PCM.
GFD625832Courtesy of FORD MOTOR COMPANY
scientia non olet · About Brad's Car Manuals