Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Ford >> 2023 >> Escape Plug-In Hybrid >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Charging And Controls - 2.5L DURATEC >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Installation

Fuel Pump Driver Module (FPDM): Installation

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
  1. Install the fuel pump driver module, then install and tighten the nuts.

    Torque: 17 lb.in (1.9 Nm)

    GFD750820Courtesy of FORD MOTOR COMPANY
  2. Connect the fuel pump driver module electrical connector.
    GFD750819Courtesy of FORD MOTOR COMPANY
  3. Install the left load compartment floor support.
    GFD750821Courtesy of FORD MOTOR COMPANY
  4. Install the rear load floor, then position the second row left seat back all the way up to the rear.
GFD750822Courtesy of FORD MOTOR COMPANY
scientia non olet · About Brad's Car Manuals