Glow Plug: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REMOVAL
1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Use special tool #9286 pliers to unplug the glow plug wiring harness connector(s) at the glow plug.

Glow Plug(s):

4. Remove the glow plug(s).

INSTALLATION
1. Screw glow plug(s) into cylinder head and tighten to 12 Nm (115 lbs. in).
2. Connect the glow plug wiring harness connector (s)
3. Install the engine cover.
4. Connect negative battery cable.