Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> GMC >> 2000 >> C3500 HD 6.5 F, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System Self-Diagnostics - Diesel >> Diagnostic Tests >> DTC P0604: Control Module Random Access Memory >> Diagnostic Procedures

Diagnostic Procedures

Download the full database via torrent (~1.1 TB)
  1. If OBD system check has been performed, go to next step. If OBD system check has not been performed, see ON-BOARD DIAGNOSTIC (OBD) SYSTEM CHECK  under SELF-DIAGNOSTIC SYSTEM.
  2. Replace PCM. Perform PCM relearn procedures. See PROGRAMMING . After repairs, go to next step.
  3. Using scan tool, clear DTCs. Start and warm engine to normal operating temperature. Select DTC, SPECIFIC, and then enter DTC P0604. Operate vehicle within the conditions for setting this DTC. If scan tool indicates that this test ran and passed, go to next step. If scan tool does not indicate that this test ran and passed, go to step  2.
  4. Using scan tool, check for DTCs. If any undiagnosed DTCs are set, perform appropriate DTC test. If no DTCs are set, system is okay.
scientia non olet · About Brad's Car Manuals