Keyless Entry Receiver: Service and Repair

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT

REMOVAL PROCEDURE

1. Remove the left side instrument panel sound insulator.
2. Disconnect the electrical connector.
3. Remove the remote control door lock receiver from the instrument panel sound insulator by unsnapping it.

INSTALLATION PROCEDURE

1. Install the remote control door lock receiver from the instrument panel sound insulator by snapping it.
2. Connect the electrical connector.
3. Install the left side instrument panel sound insulator.
4. Reprogram the transmitters. Programming and Relearning
5. Test the operation of the system.