Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> GMC >> 2005 >> Jimmy Part Time, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - (Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement (Utility/Crew Cab) >> Installation Procedure

Installation Procedure

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
    Fig 1: View Of Fuel Tank Pressure Sensor
    GM64998Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank pressure sensor (1) on the fuel sender assembly (2).
  2. Connect the fuel tank pressure sensor electrical connector.
  3. Install the fuel tank. Refer to Fuel Tank Replacement (2-Door Utility)  or Fuel Tank Replacement (4-Door Utility) .
  4. Refill the fuel tank.
  5. Install the fuel filler cap.
  6. Connect the negative battery cable.
  7. Inspect for leaks.
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
scientia non olet · About Brad's Car Manuals