Replace and Program K124 Image Processing Module or Reprogram K124 Image Processing Module

Download the full database via torrent (~1.1 TB) | Download Brad's custom LEMON patches

WARNING: This page is about a different car, the 2021 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Due to continuous improvements, the on screen selections may vary from instructions below.

To program a replacement or an existing K124 Image Processing Module, perform the following procedure:

Ignition/Vehicle OFF
Access the Service Programming System (SPS) and follow the on-screen instructions.
On the SPS Supported Controllers screen, select K124 Image Processing Module - Programming and follow the on-screen instructions.
Clear DTCs.