Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> GMC >> 2024 >> Hummer EV 2 >> Repair and Diagnosis >> General Information >> Reset Procedures >> Programming And Setup - All Systems >> Repair Instructions >> K183 UHF Short Range Low Energy Remote Control Access Transceiver: Programming and Setup >> Replace and Program Control Module

Replace and Program Control Module

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches

To program a replacement control module, perform the following procedure:

  1. Access the Service Programming System (SPS) and follow the on-screen instructions.
  2. On the SPS Supported Controllers screen, under Select Controller, select K183 UHF Short Range Low Energy Remote Control Access Transceiver.
  3. On the SPS Supported Controllers screen, under Select Function / Sequence, select Programming and follow on screen instructions.
  4. On the SPS Supported Controllers screen, under Select Function / Sequence, select Configuration and follow the on-screen instructions.
  5. Clear DTCs.