Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Genesis >> 2017 >> G80 5.0 Ultimate >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 5.0L >> Rail Pressure Sensor >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)
  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Release the residual pressure in fuel line (Refer to "RELEASE RESIDUAL PRESSURE IN FUEL LINE " in this group).
    CAUTION: When removing the fuel pump relay, a Diagnostic Trouble Code (DTC) may occur. Delete the code with the GDS Repair Procedures after completion of "Release Residual Pressure in Fuel Line" work.
  3. Remove the intake manifold.

    (Refer to INTAKE & EXHAUST SYSTEM - 5.0L Engine Mechanical System )

  4. Disconnect the rail pressure sensor connector (A), and then remove the sensor (B) from the delivery pipe.
G11336689
scientia non olet · About Brad's Car Manuals