Repair Procedures: Inspection
- Switch "OFF" the ignition.
- Disconnect the OTS connector.
- Remove the OTS.
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the OTS terminals 1 and 2.
- Check that the resistance is within the specification.
| Temperature [°C (°F)] | Resistance (kΩ) |
|---|---|
| -40 (-40) | 52.15 |
| -20 (-4) | 16.25 |
| 0 (32) | 6.0 |
| 20 (68) | 2.45 |
| 40 (104) | 1.11 |
| 60 (140) | 0.54 |
| 80 (176) | 0.29 |