Repair Procedures: Inspection
- Switch "OFF" the ignition.
- Remove the ECTS.
(Refer to "REMOVAL ")
- After immersing the thermistor of the sensor into engine coolant, measure resistance between the ECTS terminals 3 and 4.
- Check that the resistance is within the specification.
| Temperature | Resistance (kΩ) | |
|---|---|---|
| °C | °F | |
| -40 | -40 | 48.14 |
| -20 | -4 | 14.13 - 16.83 |
| 0 | 32 | 5.79 |
| 20 | 68 | 2.31 - 2.59 |
| 40 | 104 | 1.15 |
| 60 | 140 | 0.59 |
| 80 | 176 | 0.32 |