Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Genesis >> 2021 >> G70 2.0T, AWD >> Repair and Diagnosis >> Transmission >> Transfer Case >> AWD Control System >> AWD Ecu >> Repair Procedures >> Removal

Repair Procedures: Removal

Download the full database via torrent (~1.1 TB)  |  Download Brad's custom LEMON patches
NOTE:
  • Prior to replacing the 4WD ECU, back up the 4WD ECU"s clutch learning with the GDS tool.

(Refer to AWD Control System - "ADJUSTMENT ")

  1. Turn ignition switch OFF and disconnect the negative (-) battery cable.
  2. Remove the crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the knee air back.

    (Refer to Restraint - "KNEE AIRBAG (KAB) MODULE ")

  4. Disconnect the AWD ECU connector (A).
    G14176327Courtesy of HYUNDAI MOTOR AMERICA
  5. Remove the AWD ECU bracket nut and then removing the AWD ECU (A).

    Tightening torque: 

    9.8 - 11.8 N.m (1.0 - 1.2 kgf.m, 7.2 - 8.7 lb.ft)

    G14176328Courtesy of HYUNDAI MOTOR AMERICA