Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Genesis >> 2021 >> G70 3.3T, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Oil Pressure Sensor (OPS) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

Download the full database via torrent (~1.1 TB)
  1. Switch "OFF" the ignition.
  2. Disconnect the OPS connector.
  3. Remove the OPS.
  4. After immersing the thermistor of the sensor into engine coolant, measure resistance between the OPS terminals 2 and 4.
  5. Check that the measurement is within the specification.
    Pressure (Bar) Output Voltage (V) [Vref=5V]
    0 0.5
    5 2.5
    10 4.5
scientia non olet · About Brad's Car Manuals