Brad's Car Manuals: A 3rd party mirror of CHARM + LEMON car manuals
Home >> Genesis >> 2021 >> G70 3.3T, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 3.3L >> Electronic Throttle Control (ETC) System >> Repair Procedures >> Adjustment >> ETC Module Learning Procedure

ETC Module Learning Procedure

Download the full database via torrent (~1.1 TB)

Be sure to perform the ETC module learning procedure when replacing or re-installing the ETC module.

  1. Wait for 1 minute with the ignition switch ON.
  2. Start the engine and hold the idle status for 15 minutes.
  3. Wait for 1 minute with the ignition switch OFF.
  4. Restart the engine, check that the idle speed is stable.
    NOTE:
    • Failing to perform the ETC module learning procedure after replacement or reinstallation may lead to MIL illumination with DTCs.
scientia non olet · About Brad's Car Manuals